1948 Bernard Gross Flying Wing – Full Wood Pack

Description

The Bernard Gross Flying Wing kit has been 100% designed and manufactured in the UK. It is cut on our own owned and managed laser cutters and contains more than 500 easy-to-assemble parts.

It has been designed to be a quick-to-build that can take just a matter of a few days to build plus additional time to sheet and cover – to your specification.

This is a full wood kit, which means it contains all the wood needed to complete the model as per the design.   This kit does not include, carbon spars, hardware, electrics, wheel, or covering materials.  If you, however, decide to completely sheet the wings or fuselage you will require additional balsa sheet and/or covering material.

MVM recommends the Accessory Package which contains carefully sourced hardware to help complete the model.

To complete the model you will need:

The Accessory Pack which contains the hardware needed to complete:https://modernvintagemodels.co.uk/product/bernard-gross-flying-wing-accessory-pack/

The Electronics package which contains the electronics needed to complete: https://modernvintagemodels.co.uk/product/1948-bernard-gross-flying-wing-electronics-package/

Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 94 inches (2.4M) – Wings detach for easy transporting
Weight – 4-5Lbs as per the original

Recommended equipment – Not Included
Motor – D3635 @ about 400W 1000-1450KV
Battery 2200 mAh 3 Cell Lipo
3x Servos – HS85MG / HS5085MG
ESc – 30A
9.5 Inch Propeller – 2,3 or 4 bladed, Folding or Static.