Multiplex EasyStar 3 Electric Glider – KIT

Description

The EasyStar 3 Electric Glider  Kit is the ideal entry-level model – quick to built and easy to master. You can learn to fly wonderfully with this “Star”, which has received multiple awards from the experts. It has excellent gliding properties and stays in the air for a long time. With a recommended 3s 2200mAh battery, up to 40 minutes of flight time can be achieved without thermals. Thanks to the rear-facing, protected motor, it can handle rough landings. It draws attention with its striking design, and the long success story of the EasyStar, with which today’s professionals began.

Multiplex have continued to develop and improve it to this day.

Multiplex have already equipped the new EasyStar 3 with ailerons that are ready for operation. This means that beginners can learn to control all axes from the start. The advanced pilot will be happy with the EsayStar’s agility.

Please be aware this is a KIT.  You will require all electronics to get this into the air, including (but not limited to), Motor, ESC, wiring, propeller, servos etc.

I learned to fly on an EasyStar without any tuition.  it is almost indestructible, I was learning to fly in a very remote location in East Anglia, where I had use of about 40 Acres of common land.  Right in the middle of this was an old WW2 pillbox, and yes you guessed it I flew it straight into it.  To my surprise all it did was crease the nose a little bit.  I continued flying it for years afterwards.  I have now had three of these, I have combatted it, thermalled with it, slope soared with it, done spot landings with it, its quite simply a brilliant plane.  It is my go-to plane if I want to fly in reasonably high winds, you can virtually harrier it all the way to the ground.  If I were to crash it I would definitely purchase another, in fact I already have just on the off-chance that this one does finally meet an untimely end

Get started with the Easy Star 3.

WHAT’S INCLUDED:

The EasyStar 3 Kit consists of: foam parts un-assembled, a sheet of decals, push rods and horns.

TECHNICAL SPECIFICATIONS

Model type: Electric glider
Material: Elapor
Level: 1 Beginner
Wingspan in mm: 1366
RC functions: Rudder / Elevator / Ailerons / Motor
Electric flight weight in grams: 700
Flight time in minutes: 40
Total wing loading g per qdm: 25
Recommended battery: / 2200mAh 3 cell LiPo – NOT INCLUDED
Construction time: About 60 minutes