Shove Ha’Penny by Charlie Jeffries’
£69.99
MVM brining you Charklie Jeffreys’ Shove Ha’Penny
In association with AeroModeller magazine MvM is proud to be bringing you a range of short-kits. These are from their Centre-fold Free Plans Specials. This first model is Charlie Jeffreys’ Shove Ha’Penny as seen in AeroModeller December 2025 edition.
MvM’s Shove Ha’Penny kit contains both free flight and RC parts as a single kit. It also offers two configurations for engine bearers to accommodate both a Mills 0.75cc as well as a Mills 1.3cc.
The Shove Ha’Penny is a delightful model, which exudes character. This is a short-kit and contains all the laser cut parts required to complete the model . But in MvM tradition we have gone above and beyond and done a little more. As an example, the fin and rudder have been slightly tweaked , enabling those parts to essentially interlock, making the kit even easier to build. This also therefore requires less strip-wood for you to purchase. Likewise we also slightly tweaked the spats and spat fairings to make those even easier to assemble too. In addition the boom has been carefully crafted to provide a single but highly effective join line. This maximises the glue joint without compromising the ability to bend the balsa into the required tube shape.
MvM are really excited by this plane. Hats-off to Charlie for making this stunning model available to one and all.
Specification:
Wingspan – 50” – ~1270mm
Power 0.75-1.3cc Diesel or equivalent
Free Flight or Radio Controlled
2-3 channel – Rudder, Elevator, (Throttle) – Depending on your configuration
Description
MVM brining you Charklie Jeffreys’ Shove Ha’Penny
In association with AeroModeller magazine MvM is proud to be bringing you a range of short-kits. These are from their Centre-fold Free Plans Specials. This first model is Charlie Jeffreys’ Shove Ha’Penny as seen in AeroModeller December 2025 edition.
MvM’s Shove Ha’Penny kit contains both free flight and RC parts as a single kit. It also offers two configurations for engine bearers to accommodate both a Mills 0.75cc as well as a Mills 1.3cc.
The Shove Ha’Penny is a delightful model, which exudes character. This is a short-kit and contains all the laser cut parts required to complete the model . But in MvM tradition we have gone above and beyond and done a little more. As an example, the fin and rudder have been slightly tweaked , enabling those parts to essentially interlock, making the kit even easier to build. This also therefore requires less strip-wood for you to purchase. Likewise we also slightly tweaked the spats and spat fairings to make those even easier to assemble too. In addition the boom has been carefully crafted to provide a single but highly effective join line. This maximises the glue joint without compromising the ability to bend the balsa into the required tube shape.
MvM are really excited by this plane. Hats-off to Charlie for making this stunning model available to one and all.
Specification:
Wingspan – 50” – ~1270mm.
Power 0.75-1.3cc Diesel or equivalent.
Free Flight or Radio Controlled.
2-3 channel – Rudder, Elevator, (Throttle) – Depending on your configuration.
*While not complex or arduous, this is a builders model, you will need some to master some building skills to complete the model – but boy is it worth it…
Recommended equipment and accessories – Not Included
Engine – 0.75-1.3cc diesel or equivalent – MvM are even putting an electric power plant in one we are building, (this does require manual modification)
Propeller – depending on your power plant.
Spinner – nice to have, size to fit.
Receiver Battery
Receiver
Covering of your choice
Associated Hardware, magnets, push-rods, clevises, snakes etc.
Balsa strip for boom and general assembly
Balsa sheet for covering the fuselage
Servos – Suggested MacGregor MG1003DS x 2
Additional information
| Weight | 1.3 kg |
|---|---|
| Dimensions | 60 × 17 × 3 cm |
