1941 Boomer Bus – Full Wood Pack
£124.50
This kit contains all the wood needed to finish your model as per the design and instructions.
Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 54 inches (1370mm) – Wings detach for easy transporting
Weight about 2.5 lb’s as per the original
Recommended equipment – Not Included
Motor – D3536 @ about 400W 1000-1450KV
Battery 1300-1800 mAh 3 Cell Lipo – or whatever 3Cell package fits.
2x Servos – HS85MG / HS5085MG/ MacGregor MG1073DS
Esc – 30A
9×6 propeller
2x 2″-2.5″ lightweight wheels
Associated Hardware, magnets, push-rods, clevises, etc.
Covering of your choice
Description
MVM brining you the 1941 Boomer Bus.
In the tradition of a free flight model. We have tried to keep this as true to form as the original as possible, for that reason it does still have an under cambered aerofoil. Yes, it would have been easier to design it with a flat-bottomed aerofoil, but that would have been a huge departure from the original. But because of the aerofoil profile I would recommend using Oracover to cover your model, this seems at least to us to have more adhesion than other less expensive films.
This has been a labour of love, we started the design of this model more than a year ago, and it’s been through many iterations and many prototypes to perfect the design.
The kit is 54” wingspan, will weigh about 2.5 lb’s when complete, and requires 3 channels (elevators, rudder and throttle).
Please visit our FaceBook page at: https://www.facebook.com/groups/modernvintagemodels to see what our customers are saying.
The Boomer Bus is part of MVM’s “rapid build” set, and takes about 2 days to complete plus covering,
This is a full wood kit, which means it contains all the wood and wooden parts needed to complete the model as per the design, including partial wing sheeting and fuselage planking both of which are laser cut and therefore simple to construct.. This kit does not include, hardware, electrics, wheels or covering materials.
To complete the model you will need:
The Accessory Pack which contains the hardware needed to complete:
The Electronics Package which contains the electronics needed to complete:
Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 54 inches (1370mm) – and the wings detach for easy transporting
Weight – about 2.5 lb’s as per the original
Recommended equipment – Not Included
Motor – D3536 @ about 400W 1000-1450KV
Battery 1300-1800 mAh 3 Cell Lipo – or whatever 3 cell package fits.
2x Servos – HS85MG / HS5085MG/MacGregor MG1073DS
Esc – 30A
9×6 propeller
2x 2″-2.5″ lightweight wheels
Associated Hardware, magnets, push-rods, clevises, etc.
Covering of your choice
Additional information
Weight | 3 kg |
---|---|
Dimensions | 100 × 33 × 9 cm |