1948 Bernard Gross Flying Wing – Accessory Pack
£49.00
This package contains the following hardware that should help complete the model:
- 6 x 4mm T-nuts
- 20 x 8mm x 3mm magnets
- 2 x 3mm collets
- 4 x M4 x 16 motor mount machine screws
- 1 x Servo Snake for Rudder
- 4 x quick links to connect to control horns
- 2x M4x40 Machine screws for wing joiner
- 3x 6mm x 1000mm (ID 4mm x 1 mm) carbon tubes
- 1x 45-47mm 3mm piano wire – wheel axle
- 1x 3.5″ Wheel pack -Machine cut with rubber tyre
- 8 x Servo Hatch Screws
- 6 x Servo Screws
- 9x CA Hinges – these must be cut in half
- 3x Control rods
- 1x mini control rod
- 3x 3mm Female bullet connectors
- 3x 3mm Male bullet connectors
- 3x 9″ Lengths of extension cables for motor
- 6x 1″ lengths of heat shrink for cable joints
Description
This MVM Accessory Pack contains a comprehensive set of hardware required to complete the Bernard Gross flying wing radio control plane kit.
- 6 x 4mm T-nuts
- 20 x 8mm x 3mm magnets
- 2 x 3mm collets
- 4 x M4 x 16 motor mount machine screws
- 1 x Servo Snake for Rudder
- 4 x quick links to connect to control horns
- 2x M4x40 Machine screws for wing joiner
- 3x 6mm x 1000mm (ID 4mm x 1 mm) carbon tubes
- 1x 45-47mm 3mm piano wire – wheel axle
- 1x 3.5″ Wheel pack -Laser cut with rubber tyre
- 8 x Servo Hatch Screws
- 6 x Servo Screws
- 9x CA Hinges – these must be cut in half
- 3x Control rods
- 1x mini control rod
- 3x 3mm Female bullet connectors
- 3x 3mm Male bullet connectors
- 3x 9″ Lengths of extension cables for motor
- Heat shrink sleeving for cable joints
The accessory pack does not include the glue or covering materials.
This accessory pack is included in MVM’s Bernard Gross flying wing full kit https://modernvintagemodels.co.uk/product/1948-bernard-gross-flying-wing-full-kit/
Additional information
| Weight | .1 kg |
|---|---|
| Colour | Blue |