MVM Howard DGA-3 – Accessory Pack
£32.50
The MVM Howard DGA-3 “Pete” Accessory Pack contains a comprehensive set of hardware required to complete MVM’s Boomer Bus radio control plane kit. – Note lengths quoted are approximate, and may vary
Length of 3/32 wire for under carriage
12 x 6mmx2mm Magnets
8 x servo screws
1×18″ lengths of Music Wire 1mm (0.04″)
1x 6″ length of thin walled 5mm Brass strip – for fixing points
Length of braided cable and associated fixing for flying wires
2x Washers for Axle
2x Collets for Axle
The accessory pack does not include the glue or covering materials, Wheels, 3D printed dummy motor, spinner or any 3D printed parts.
Description
The MVM Howard DGA-3 “Pete” Accessory Pack contains a comprehensive set of hardware required to complete MVM’s Boomer Bus radio control plane kit. – Note lengths quoted are approximate, and may vary
3/32 wire for UC- 9″
12 x 6mmx2mm Magnets
8 x servo screws
2×12″ lengths 7/32″ Aluminium K&S thin walled Tube
2×12″ lengths 3mm Carbon Rod
3×36″ lengths of Music Wire 0.5mm (0.02″)
1x 6″ length of thin walled 3mm Brass tube – for fixing points
2x Washers for Axle
2x Collets for Axle
The accessory pack does not include the glue or covering materials, Wheels, 3D printed dummy motor, spinner or any 3D printed parts.
Additional information
| Weight | 1.01 kg |
|---|---|
| Colour | Blue |
