MVM’s Delta Rapier V4 – Special – Only 40 Available, each one sequentially numbered
£149.50
The MVM Delta Rapier kit V4.
Following customer feedback, this is Version 4 of the popular Delta Rapier – it now comes with cassette style servo mounting making it significantly simpler to remove servos in the event of a problem. The receiver hatch has also been redesigned to make it simpler to construct. The rudder is now about twice the size as previously which should provide capability for flat spins and knife edging.
The kit does not include : Battery, electronics and propeller, all of which is also available from MVM.
MVM recommends both the Electronics Package which contains carefully sourced electronics to help complete the model, as well as the hardware accessory pack, both of which are available from MVM.
Do you want unlimited vertical?
Need to do right angle turns?
Require insane manoeuvrability?
Whilst commanding a huge speed envelope? MVM’s Delta Rapier is the plane for you….
Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 38 inches (about 965mm)
Weight about 3 Lbs
Recommended equipment – Not Included
Motor – D3536 @ about 400W 1000-1450KV
Battery 2200 mAh 3 Cell Lipo
3x Servos – HS85MG / HS5085MG
ESC – 40A
Receiver
9×6 Inch Propeller – 2 bladed
39 in stock
Description
MVM’s Delta Rapier has been 100% designed and manufactured in the UK. It is cut on our own owned and managed laser cutters and contains 200 easy-to-assemble parts.
It has been designed to be a rapid-build that can take just a matter of a few hours to build plus additional time to cover to your specification. At MVM, we build these in as little as two hours, the parts are mostly interlocking, and glue is applied after the parts have been fitted together.
This is a full kit, which means it contains all the wood needed to complete the model as per the design, carbon tubes, the hardware accessory pack and the covering – designed by the same person who creates the livery for the Red Arrows.
Following customer feedback, this is Version 4 of the popular Delta Rapier – it now comes with cassette style servo mounting making it significantly simpler to remove servos in the event of a problem. The Receiver hatch has also been redesigned to make it simpler to construct. The Rudder is now about twice the size as previously, which should provide capability for flat spins and knife edging.
The kit does not include : Battery, electronics and propeller, all of which is also available from MVM.
MVM recommends both the Electronics Package which contains carefully sourced electronics to help complete the model, as well as the hardware accessory pack, both of which are available from MVM.
Do you want unlimited vertical?
Need to do right angle turns?
Require insane manoeuvrability?
Whilst commanding a huge speed envelope? MVM’s Delta Rapier is the plane for you….
To complete the model you will need:
The Electronics package which contains the electronics needed to complete: https://modernvintagemodels.co.uk/product/mvm-delta-rapier-flying-wing-electronics-package/
Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 38 inches – about (965mm)
Weight – about 3lb
Recommended equipment – Not Included
Motor – D3536 @ about 400W 1000-1450KV
Battery 2200 mAh 3 Cell Lipo
3x Servos – HS85MG / HS5085MG or MacGregor MG1073DS
ESC – 40A – with brake function
Receiver
9×6 Inch Propeller – 2 bladed
Additional information
| Weight | 3 kg |
|---|
