MVM’s Delta Rapier – Full Wood and Carbon Package

Description

MVM’s Delta Rapier has been 100% designed and manufactured in the UK. It is cut on our own owned and managed laser cutters and contains 200 easy-to-assemble parts.

It has been designed to be a rapid-build that can take just a matter of a few hours to build plus additional time to cover to your specification.  At MVM, we build these in as little as two hours, the parts are mostly interlocking, and glue is applied after the parts have been fitted together.

This is a full wood kit, which means it contains all the wood needed to complete the model as per the design.

It does not include hardware, electrics, or covering materials, carbon tubes or the hardware pack,  but all of which are available form MVM.

MVM recommends both the  Electronics Package which contains carefully sourced electronics to help complete the model, as well as the hardware accessory pack, both of which are available from MVM.

Do you want unlimited vertical?
Need to do right angle turns?
Require insane manoeuvrability?
Whilst commanding a huge speed envelope?  MVM’s Delta Rapier is the plane for you….

For a limited time only this kit comes with:
Full Woodpack.
Comes with Carbon Tubes 6mm OD  1mm Wall one 1000mm the other 500mm

To complete the model you will need:

The Electronics package which contains the electronics needed to complete: https://modernvintagemodels.co.uk/product/mvm-delta-rapier-flying-wing-electronics-package/
and the hardware accessory pack: https://modernvintagemodels.co.uk/product/mvm-delta-rapier…g-accessory-pack/

Specification:
3 Channel – Elevons, Rudder and Motor
Wingspan – About 38 inches – about (965mm)
Weight –  about 3lb

Recommended equipment – Not Included
Motor – D3536 @ about 400W 1000-1450KV
Battery 2200 mAh 3 Cell Lipo
3x Servos – HS85MG / HS5085MG or MacGregor MG1073DS
ESC – 40A – with brake function
Receiver
9×6  Inch Propeller – 2 bladed
Associated hardware – Magnets, Screws, Pushrods etc.